return to nonprint version
Draft New Capline
6
Draw a line from the lowered cap to the raised bicep. The length of this line should correspond to your calculated measurement.
Repeat on the other side.
7
Divide each of these lines into quarters.
8
At the lower quarter mark, measure down ¼" and make a mark.
9
At the upper quarter mark, measure up ¼" and make a mark.
10
Repeat on the other side.
11
Use your curve tool to draw the curve of the new flatter sleeve cap through the marks. The curve crosses over the line at the halfway mark. 
12
Draw underarm curve.
13
Repeat on the other side. Make sure that the line curves smoothly from one segment to the next.